Northway logo

Northway Industries, Inc.

Quality Service Integrity

Serving Woodworkers Nationwide for over 56 Years

Standard Closet Specification Sheet


left
right

Product Matrix
(Includes closet part drawings)

Material Information
(MSDS and Tech Data)



The closet components available here are to be installed by professionals experienced in customized closet systems. The components are designed to be used with the hardware listed below. We do not include hardware with the components except when purchasing the drawer box units. We will quote the hardware in bulk standards on a special order basis.


TYPICAL CONSTRUCTION

BACK TO TOP

3/4" thick White Thermally Fused Melamine on 45lb. density particleboard core.


Edges: .018 PVC hot melt machine applied.


TYPICAL DRAWER CONSTRUCTION

BACK TO TOP

The drawer units are available in 3, 4, and 5 drawer sets. Each set is complete with ready to assemble drawer parts, drawer slides, screws, pulls, and two fixed shelves. These sets are designed to be used with 24" fixed shelves which can be purchased separately. Please refer to the drawer box instruction sheets for the mounting locations of the slides and drawer fronts.


Material: 1/2" Birch Melamine.


Bottom: Trapped in a dado on all four sides.


Sides: 6mm dowel construction.


Front: 3/4" Rigid Thermofoil (RFT).


Slides: 20" 100 lb. full extension ball bearing.


Pulls: 4" Satin Chrome Wire.


Glue packs and Screws for assembly


Shipped unassembled


Packing: Drawer are individually cartoned.


HARDWARE (NOT INCLUDED)

BACK TO TOP

Hafele #290.12.000: 98" long wall rail used for hanging cabinet.


Hafele #290.12.780: 98" long wall rail cover.


Hafele #290.07.711: Cabinet hanger attached to left partitions.


Hafele #290.07.710: Cabinet hanger attached to right partitions.


Hafele #803.33.210 Chrome: Wardrobe rail support. Goes in 32mm holes in partition.


Hafele #801.13.200: Wardrobe rail. Goes between 2 rail supports (30mm x 15mm x 2500mm).


Hafele #805.87.993: Shoe rail bracket, black. Goes in 32mm holes in partition.


Hafele #263.10.105 (Brown), #263.10.405 (Beige), #263.10.705 (White): 19 mm Rafix housing cams. For fixed shelves.


Hafele #245.07.711: 32mm spring catches. For attaching the toe kick.


QUALITY STANDARDS

BACK TO TOP

Tolerances:

  • Shelf setback: 1/32"±1/32".
  • Shelf length: Length±1/64".
  • Toe kick inset: 1/4"±1/16"
  • Edge Quality: shall be machined flush with all sharp corners removed. A maximum visible overlap shall be acceptable of no more than .005 (.13mm) for a length of no more than 1" (25.4mm) in any 24" run (610mm).

PACKAGING

BACK TO TOP

All parts labeled per closet


Skidded, corner protectors, shrink wrapped and strapped.


Bulk packaged for large quantities